How to Make a DIY Water Filter (With Pics)
In survival scenarios, access to clean water should be top priority. Unfortunately, many of the water sources you find may contain waterborne diseases. This guide introduces a pragmatic solution—a DIY water filter using a readily available plastic bottle.
Often found in survival settings like beaches, plastic bottles can be repurposed effectively. With a few other key ingredients, you can make yourself a water filter that could very well save your life.
Want to save this post for later? Click Here to Pin It On Pinterest!
Understanding Water Filtration for Survival
When you’re in a survival situation, knowing how to filter water could be a lifesaver. But what exactly does filtering do? Essentially, it’s about removing the bad stuff – like dirt, sand, and some bacteria – to make water safer to drink.
This DIY filter is pretty good at tackling these contaminants. However, it’s important to remember that this method has its limits. It can’t get rid of all harmful microorganisms or chemical pollutants. Think of things like viruses or heavy metals; these guys are too small or too sneaky for a simple filter to catch.
That’s where boiling comes into play. After filtering, boiling your water is like adding an extra layer of security. It ensures that any remaining nasties are taken care of, making the water much safer to drink.
In survival situations, this one-two punch of filtering and boiling is a good strategy. The last thing you need is intestinal issues as a result of poor water quality.
Materials Needed & Filtration Layers
Okay, so you’re stuck out in the wild and in need of clean water—where do you start? Luckily, the materials needed for this DIY water filter are pretty common, even in survival situations. Here’s what you’re going to need:
Plastic water bottle: Cut the bottom off to use as the container for your filter. These are surprisingly common, even in remote areas, due to their unfortunate persistence in the environment.
Pebbles or small rocks: These act as the first layer in your filter, removing larger particles from the water, like leaves or insects.
Activated charcoal: This is the MVP of your filtration system. Charcoal improves the taste of the water and removes some contaminants, thanks to its absorbent nature. Although finding activated charcoal out in the wild might sound tough, you can make some from hardwood if you’re in a pinch.
Sand: Another layer for trapping smaller particles, sand helps in further refining the filtration process.
Cotton or cloth: Finally, a piece of cotton or any clean cloth can be used at the top to catch any remaining debris. In a pinch, a coffee filter will work too.
Each layer has a specific role in the filtration process, working together to make water safer. While rocks and sand catch physical particles, charcoal works on a molecular level, removing some toxins and improving the water’s overall quality.
Step-by-Step Guide: Creating a DIY Water Filter
Creating a DIY water filter in a survival situation could quite literally be a lifesaver. Here’s how to do it, step by step:
1. Cleaning and preparing the plastic bottle: Start by finding a plastic bottle and cutting its bottom off. Ensure the bottle is clean to avoid contamination.
2. Making necessary modifications to the bottle for filtration: Punch small holes in the cap of the bottle. This will allow filtered water to flow through without letting the filtration materials escape.
3. Including a layer of cotton or a coffee filter: The topmost layer (which is actually at the bottom of your setup) should be a piece of cotton or a coffee filter. This stops any remaining particulate matter.
4. Adding a layer of sand for fine filtration: On top of the cotton, add a layer of sand. This will help filter out smaller particles the rocks and charcoal might miss.
5. Layering activated charcoal for chemical filtration: Above the sand, add a layer of activated charcoal. This is key for removing contaminants and improving the taste of the water. If you don’t have activated charcoal, you can substitute hardwood charcoal.
6. Adding a layer of small rocks or pebbles: Place a layer of small rocks or pebbles at the bottom of your bottle (now the top since it’s upside down). This layer helps remove larger particulates from the water, such as leaves or insects.
7. Stacking the layers in the plastic bottle: Ensure each layer is distinct and compact enough to prevent mixing. Correct layering is crucial for effective filtration.
8. Slowly pour your water into the filter: Don’t push water through quickly, the idea is to let it naturally filter into your water container.
This DIY water filter is a simple yet effective method for obtaining cleaner water in survival situations. Remember, while this filter can improve water quality, it’s always safest to boil the water before drinking, if possible.
Testing and Usage
Once you’ve set up your DIY water filter, it’s crucial to test its effectiveness before relying on it. Start by pouring a small amount of water into the filter and observe how it flows through the layers. If it’s too slow, you might need to adjust the compactness of your materials.
Additionally, evaluate the clarity of the filtered water. If it appears cloudy or has a peculiar taste, recheck your layers for any misplaced materials. If you notice dirty water or parts of the filter materials in your clean water, it’s a sign that the filter is not functioning properly and requires restructuring.
Final Thoughts
This DIY water filter is a last resort in an emergency. Each layer—from the charcoal to the pebbles—plays its part in cleansing water, making it safer to drink. The materials are readily available in almost any locale.
Just don’t forget, always have a backup filtration method in your survival kit so you don’t need to rely on this. Even though it gets the job done it is not the most ideal way to get potable water when SHTF.
Like this post? Don’t Forget to Pin It On Pinterest!
You May Also Like:
Read the full article here